Sofwere untuk mengetahui tipe Model Mainboard

What is CPU-Z

CPU-Z is a freeware that gathers information on some of the main devices of your system.
CPU

• Name and number.
• Core stepping and process.
• Package.
• Core voltage.
• Internal and external clocks, clock multiplier.
• Supported instruction sets.
• Cache information.

Mainboard

• Vendor, model and revision.
• BIOS model and date.
• Chipset (northbridge and southbridge) and sensor.
• Graphic interface.

Memory

• Frequency and timings.
• Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table.

System

• Windows and DirectX version.

The CPU-Z's detection engine is now available for customized use through the CPUID System Information Development Kit, a professional SDK built for the Microsoft Windows operating systems.

^ back on top ^

Screen images

^ back on top ^

Install & configuration

Install and Remove
Since version 1.51, CPU-Z includes an installer. The installation offers several advantages in comparison to the stand-alone version :

• The installation creates program entries in the start menu and on the desktop.
• The kernel mode driver used by CPU-Z is installed on the system, that avoids to install / remove it at every run. That makes the process more stable and slightly faster.

Installation
Run the setup executable file, and let it guide you for the installation process.
Removal
You can remove the program either from the Add or Remove Programs window (from Settings, Control Panel), or choose Uninstall CPU-Z from Start menu, Programs, CPUID, CPU-Z.

Configuration file
CPU-Z uses a configuration file, cpuz.ini, that allows to set several parameters for the program. The cpuz.ini file must be in the same directory as cpuz.exe. It looks like this :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=1
MaxPCIBus=256
DMI=1
Sensor=1
SMBus=1
Display=1
ShowDutyCycles=0


TextFontName	Font used for the information boxes.
TextFontSize	Size of the font used for the information boxes.
TextFontColor	Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
LabelFontName	Font used for the label boxes.
LabelFontSize	Size of the font used for the label boxes.
Sensor	Set to OFF (or 0) disables sensor chip detection and voltages measurement.
DMI	Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision.
PCI	Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information.
MaxPCIBus	Sets the maximum PCI bus to scan. Default value is 256.
SMBus	Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information.
Display	Set to OFF (or 0) disables the video card information reported in the validator.
ShowDutyCycles	Set to 1, switches the alternate clock computation method based on duty cycles. 0 to disable.

Set to 1, uses the display driver to read the display adapters information. 0 to dosable. Parameters

-txt=report	Launch CPU-Z in ghost mode : no interface appears, the register dump (report.txt) is automatically created. Example: cpuz.exe -txt=c:\mydirectory\mysystem: runs CPU-Z in ghost mode. Report file mysystem.txt is automatically generated in directory c:\mydirectory.
-html=report	Same as "-txt" but generates the html report file.
-core=id	Displays clock speed of core #id (id can be set from 0 to "Number of cores minus one"). It is then possible to check the speed of each core by running as many instances of CPU-Z as necessary, using batch files for example: cpuz0.bat: cpuz.exe -core=0 cpuz1.bat: cpuz.exe -core=1 Note that the current core can be dynamically selected by right-clicking in the CPU page, and select the target core. This feature is available from version 1.42.
-console	Generates output in a command prompt (Windows XP only).

Special Keys
The F5 key allows to save a screenshot as a bmp file in the application directory. These are named cpu.bmp, cache.bmp, mainboard.bmp and memory.bmp.
The F6 key copies the current page in the clipboard.
The F7 key saves the validation cvf file in the current directory.
The F9 key switches between CPU clock computation methods.
Cache Latency Computation
The cache latency computation tool allows to gather information about the cache hierarchy of the system. For each cache level, it provides its size and its latency. Please note that code caches are not reported.


Plaese Download  Exe dan Instal saja disini